C = ใช้ความยาวบูมหลัก 30.5 m. ต่อจิ๊ปยาว 80 m. และจิ๊ปยาว 13.0 m.
D = ใช้องศาจิ๊ปที่ 50°, 25°, 45°
ติดต่อเช่ารถเฮี๊ยบ รถเครน
Reading or viewing various crane values
1. Producer
The weight table is applicable to any brand of crane that is most commonly used in Thailand, namely TADANO, KATO, LIEBHERR, KOBELCO, GROVE and SANY etc.
2. Production version
will let you know the type of crane And the size of lifting capacity of cranes, such as TR250M-6, used with TADANO cranes, Rough Terrain Crane, lifting capacity of 25 cars, Domestic Model 6
3. The weight unit represents a unit of weight measurement, such as Unit: ton (the unit of measurement that can be read is the weight unit ton).
4. Width of crane leg used (With Outriggers Set)
It shows how much the weight table in the table will lift under the conditions of using the crane leg width, for example:
- Outriggers fully extended (7.3 m.) = full leg extension 7.3 meters
- Outriggers middle extended (5.5 m.) = full leg extension 5.5 m.
- Outriggers minimum extended (2.54 m.) = full leg stretch 2.54 m.
5. Position of lifting (Slewing Position)
Shows that the values in the weight table are valid for the center of rotation, usually appearing in the upper-right corner of the table, for example:
360 degrees = can be lifted anywhere around the swing axis
Over Front = can lift only the front
Over Rear = can lift only the back
Over Side = can be lifted only on the side
6. Boom Length
It displays the boom length used for lifting most often at the top of the table and reads horizontally, each channel represents the boom length used, e.g.
A = boom length 10.65 m. 18.02 m. 25.35 m. 32.67 m. and 40.0 m.
7. Boom angles usually appear below the table for the main boom. And the front for the jeep use table
8. Jib Length
Shows the length of the jeep. Most of them are at the top of the jeep table. And read horizontally, each channel represents the length of the jeep to use, for example
C = Use main boom length 30.5 m. per jeep 80 m. and jeep length 13.0 m.