How to take care of the underground water supply system
1. Check the electrical system of the underground water supply system.
- When the underground water supply system has been made It is very necessary to check the groundwater system regularly.
2. Management of impurities in the underground water supply system
- Dirt that accumulates in the pump control cabinet should be cleaned up to prevent moisture build-up.
3. Be careful when turning the switch on and off.
- To prevent short circuit to people for example Standing on a plastic chair while the control circuit is closed or open
4. Reserve groundwater for use.
- During the flood because the underground water system There may be a problem causing the water supply to be stopped.
5. Temporarily cut off the electrical circuit of the underground water supply system.
-To prevent high voltage overload caused by lightning nearby This may result in damage or damage to the submersible pump motor.
6. Hold the main pipe with a strong material or wood.
-Use wood or strong material to hold the main pipe to prevent damage or damage to the main pipe.
7. Circuit breaker switch
-To prevent short circuit when flooding at artesian wells
8. Check the electrical equipment of the underground water supply system.
- for safety Electrical equipment and circuits should always be checked to be in good condition.
9. Get rid of weeds or mow the surrounding grass. Groundwater area
- Should remove weeds or cut the grass around The tank tower and groundwater filtration system to prevent flooding there.
All of these are the top 9 ways to take care of the groundwater system that is correct for the safety of water users. Including the administrator of the groundwater supply as well How are you? We sincerely hope that these 9 methods will be useful for everyone. More or less people