How to filter groundwater to remove limestone, iron rust
1. Pumping groundwater to store in the sump. Or water tank
Before filtering the groundwater, pump the groundwater. Or raw water to be stored at the reservoir
2. Filter the groundwater that has been disinfected.
Which will have a way to filter groundwater Through the groundwater filter tank with a pressure pump of 4 filter tanks together is a turbidity filter. Steel filter tank Resin filter tank, odor, color and chemical filter tank.
3. Filter the turbidity of groundwater.
It is to filter the turbidity of groundwater. Because groundwater at first will not have a clear color. Sometimes there will be a cloudy color like a canal water. Or perhaps the color of the groundwater may be reddish-orange as well.
4. Filter iron rust that is contaminated in groundwater.
By nature, groundwater contains precipitates of dissolved iron mixed with it. When pumping groundwater up to use
5. Filter the resin to remove limestone.
To help reduce the hardness of groundwater before being used for consumption - consumption But if groundwater is not contaminated with limestone
6. Filter odors, colors, chemicals that come with water.
After being filtered for turbidity iron rust filter and filtering limestone in groundwater already The last groundwater filter tank serves to filter unwanted odors.
7. Pumping filtered groundwater into the water tank.
After passing Groundwater filtration process finished Here, you will get quality groundwater for use. This water tank has an automatic water pump.